Though uncommon, sometimes you can be tempted to replace your roof without professional help. This is especially true for affordable corrugated roofing panels, which have a rectangular and large shape that can mislead you into believing they’re easy to install. But installing a corrugated roof is more than nailing panels of the deck.
Roofing installations and repairs are inherently high-risk jobs. Florida’s licensing requirements for roofers are strict since they often involve working at high heights and using powered tools. The consequences of unlicensed roofing jobs vary from stop-work orders to potential lawsuits. Hence, installing corrugated metal roofing is not a job for everybody.
5 things to nail a corrugated metal roof installation
1. Storage
One important thing to remember is where you will store the sheets before and during the installation. This may seem like a minor concern, but ground condensation can damage the sheets, especially if you store them outdoors. Thus, to ensure durable corrugated metal roofing solutions, use plastic sheathing beneath the bundles to minimize condensation.
Likewise, storing them in an angled position is recommended to promote water drainage and air circulation inside the bundle. If stored outside, you should also cover them with a loose tarp to protect them from rain and sun.
2. Safety
Safety is crucial in any roofing job, especially with corrugated metal roofing. At a minimum, any person working on your roof should wear PPE (Personal Protective Equipment), including fall-restraint harnesses, safety lines, safety googles, work gloves, and rubber shoes to prevent slipping off.
Besides the essential safety gear, you should also consider weather conditions when installing affordable corrugated roofing panels. Expert roofers know how dangerous it is to install metal roofing after rain, as it becomes incredibly slippery. They also avoid working with metal panels during gales or high winds, as the wind can carry an unfastened panel airborne and compromise safety for workers, residents, and passersby.
3. Cutting the panels
You will often need to cut corrugated metal roofing sheets to fit your roof design, especially in residential roofs with hips and valleys, such as dormer or mansard roofs. This task requires precise measurement skills and powered tools such as shears or tin snippers, which could result in injuries if mishandled.
It also requires safety gear like goggles or a welding mask, as cutting metal generates chips and slivers that can harm your face and scratch the panels before installation.
Now, you may lack the needed gear and equipment, but custom corrugated metal roofing services won’t. Since this is their niche, they will be equipped to address everything from storage to installation.
4. Fasteners
Before installing the corrugated metal roofing, professional roofers ensure they have the required tools:
- Cordless drill/driver with variable speed.
- Hex-head and color coated screws to prevent corrosion and blend with painted metal sheets.
- EDM vulcanized and bonded washers to prevent leaks.
Professionals will fasten the sheets in the valleys, close to ridges, caves, and end laps, where the sheet is closer to the deck, guaranteeing durable corrugated metal roofing solutions.
Moreover, the metal sheets should always be fastened with the side laps facing the prevailing wind to prevent wind-lifting during installation.
5. Installing the roof
The installation procedure will vary depending on the type of roof. For example, in gable roofs, the roofing crew often starts at one corner and moves towards the other, with the first row overhanging the roof edge. Likewise, they will ensure the ridges of the corrugated metal roofing sheets overlap. Some roofers may even apply caulk or sealant between the overlaps to reinforce water protection.
But the installation starts completely differently for hip roofs. The crew will first determine the center line of the roof and install the sheets from the middle to the sides of the roof.
When the roof is finished, it’s time to begin trim work. That means installing flashings, such as drip edges, ridge caps, or rake trims, and ensuring they are correctly fastened to ensure the affordable corrugated roofing panels last for years without leaks.
Protect your investment and safety with Hyer Quality’s corrugated metal roofing.
Installing a new roof is a considerable investment; sometimes, you even have to take out a loan to secure it. Thus, you shouldn’t let this important job fall into unqualified hands, which will only cause you issues, stress, and higher expenses to repair a roof that should’ve been installed right the first time. If you want durable corrugated roofing metal roofing solutions that genuinely last, choose Hyer Quality Roofing & Construction.
Your satisfaction is our main priority in every job, whether fixing a leak or replacing the roof. This approach guides all our actions, so you can be 100% confident that your roof will be treated with the utmost care and respect.
Contact us and get your free quote now!